Energy Coat (5 Gallons)
- Coverage: 125 sq. ft per gal.
- Color: white
- Number of coats: 2
- Tintable: yes
- Clean up: soap & water
- Use: roof & exterior walls
Please Call Us to order this product. 321-610-8213 or toll free 888-813-5065
Insulating Elastomeric Wall and Roof Coating
What is Insuladd e-coat?
Insuladd e-coat is an elastomeric, energy saving, flexible 100% water based acrylic coating. When applied as directed, this product bridges minor surface imperfections, protects against driving rain, provides out-standing durability, and offers long lasting protection, as well as offering energy saving in both cold and hot climates.
- Saves up to 40% energy by reducing heating and cooling demands.
- High Impact Resistance
- Resistant to atmospheric pollution
- Stable over a wide range of temperature variations
- Non-toxic & environmentally friendly
- Remains intact on flexible surfaces
- Excellent crack bridging
- Exceptional film durability
- Resistant to UV degradation
- Bonds well to a wide range of surfaces
- Gloss retention & Mildew resistant
- Easy to apply
- Rapid drying for quick re-coating
- Easy cleanup with soap and water
About Insuladd e-coat
Insuladd™ e-coat utilizes the very latest in ceramic micro-spheres similar to that used by NASA for use on the space shuttle tiles.
This technology has now been adopted for use in the domestic and industrial environment. Research and development has lead to the production of a light elastomeric liquid solution, which is not only easy to apply to most structures but also capable of reducing the solar loading of very large surfaces in extreme sunlight. In fact Insuladd e-coat has been shown to reduce heat gain from the sun by up to 40%.
Applications of Insuladd e-coat Waterproofing and thermal insulation to new and existing roofs, sidings, and other surfaces on a wide range of substrates such as;
- Precast and in-situ concrete
- Smooth masonry
- Plaster and smooth stucco
- Fiber-cement and GRC panels
- Sprayed PU foam
- Bituminous sheeting and coatings
- Galvanized steel and alum sheeting
- Fiberglass and plastic water tanks
- Most previously painted surfaces
Scientifically Tested and Proven by
Geoscience Ltd – World’s leading laboratory specializing in the measurement of thermal insulation, mechanical and fluid properties. Geoscience have been approved by NASA, International Conference of Building Officials (ICBO).
Center for Energy-Saving Research
School of Architecture
Huanan University of Science and Technology
Guangzhou, Guangdong, CHINA
U.S. Army - Climatic Testing Branch, Environmental Test Division – Redstone Technical Test Center: MIL – STD-810 Solar Radiation Test
Tech Traders Inc. - 2 year Energy Consumption Survey
Japanese National Railroad - Municipal Government of Tokyo, Japan
National Museum of Korea - Korea Institute of Construction
Mirak Cold Storage Co Ltd
Department of Defense - South Korea
US Department of Defense RTP #52802726
Pratt & Whitney Aerospace - propulsion laboratories
Underwriters Laboratory (UL) is the qualifying testing facility for E-Coats Energy Star rating.
How Insuladd e-coat works
Insuladd insulating coatings contain in part, ceramic micro-spheres of 30–100 microns in diameter which are coated with our patented thermally reflective material.
Insuladd acts as highly efficient heat reflecting thermal barriers, so that when the coating dries, they form an efficient barrier against heat transfer.
The thermal reflectance layer is created by the Insuladd coming closer together as the coating dries, until they eventually touch each other forming a single, very thin, thermal barrier.
This barrier reflects, refracts and dissipates heat, thereby keeping heat in a structure during the cold months and out of the structure during the hot months.
Insuladd is a patented, thermally reflective ceramic material unlike the common microspheres sold by others claiming similar technology.
Advantages over current roof coatings
Energy Savings - Insuladd e-coat can save up to 20% or more on energy costs
Labor Savings - Insuladd e-coat is applied by paint brush, roller and spray gun and does not require any specialist equipment. The time needed to coat the structure is also reduced, as a single coat dries in 2-3 hours for recoating.
Lightweight - Insuladd e-coat provides the thermal properties required but has a mass of only 0.73kg/m². Being much lighter than traditional insulation boards, it is ideally suited to areas that would not be able to withstand any large weight loading, such as lightweight roofs or thin sheet panels.
Superior Flexibility – Insuladd e-coat can flex over a wide temperature range (even bend 90° at -37°C). Its durability and flexibility makes it ideal for surfaces that will bend or move through flexing or expansion and contraction due to heating and cooling. It will elongate, bend and recover with the surface without cracking or flaking, thus ensuring that the surface will remain coated and protected at all times.
Uses of Insuladd Insulating Coatings Insuladd light insulating e-coat is ideal for areas that will be subjected to moisture as it is a waterproof coating and will not only insulate, but also protect against moisture ingress. The elastomeric coating is ideally suited for areas that will flex, such as steel sided buildings or steel roofs, boat hulls. The coatings are effective in both hot and cold climates, reducing the cooling and heating demands, they are safe, non-toxic and environmentally friendly. Insuladd Insulating Coatings can be used to quickly and easily insulate buildings and structures that would otherwise be very difficult or impossible to insulate with more traditional methods.